Portable Anesthesia Machine

AEDASS-H-3005

---

● VIP type case consisting of Two Gases 230 mm Rota-meter Oxygen and Nitrous Oxide.
● Halothane Vaporizer Goldman Type cum outlet complete with open circuit attachment.
● Rotameter inlet connection attached with Pressure Tube connecting preset Regulators for direct fitting to the Cylinders.

Portable Anesthesia Machine (with VIP Type Case)

AEDASS-H-3007

---

● VIP type case consisting of Two Gases 230 mm Rota-meter Oxygen and Nitrous Oxide.
● Halothane Vaporizer Goldman Type cum outlet complete with open circuit attachment.
● Rotameter inlet connection attached with Pressure Tube connecting preset Regulators for direct fitting to the Cylinders.


SAFETY FEATURES
» N₂O Automatic Cut Off in case failure of Oxygen Supply.
» Oxygen Failure Alarm.
» Hypoxic-Guard-Device.

Minor Anesthesia Machine

AEDASS-H-3012

---

● Two Gases 230 mm Rota-meter Oxygen and Nitrous Oxide.
● Halothane Vaporizer Goldman Type.
● Emergency Unit cum outlet complete with open circuit attachment.
● Provision for fitting Two 'B' type cylinders at the back side complete with One Drawer on Four caster wheels.

Minor Anesthesia Machine (Epoxy Coated Frame)

AEDASS-H-3012-E

---

● Provision for four cylinders attachment.
● Two Gases 230 mm Rota-meter Oxygen and Nitrous Oxide.
● Halothane Vaporizer Goldman Type.
● Emergency Unit cum outlet complete with open circuit attachment.
● Provision for fitting Two 'B' type cylinders at the back side complete with One Drawer on Four caster wheels.

Minor Anesthesia Machine

AEDASS-H-3014

---

● Long Rotating bobin flowmeter (230 mm) tube – calibrated with Luminous plate.
● Plenum type ether Vaporiser.
● Halothane Vaporizer Goldman Type.
● Non-return cum pressure relief valve.
● 50 mm dia Oxygen Gauge.
● Table top stainless steel.
● Top Tray for monitoring Instruments.
● Pin indexed Yokes for Oxygen.
● Pin Index Yokes for Nitrous-Oxide.
● Emergency Oxygen supply button.
● Outlet.
● Detachable capacious drawer.
● Maggill's circuit.
● Stainless/painted (Powder coated) frame.
● N₂O cut off system.
● Preset Regulators for O₂ and N₂O.
● Wheels with brake.


SAFETY FEATURES
» N₂O cut off in case Oxygen pressure fails below 10-15 Ponds.

Minor Anesthesia Machine (Epoxy Coated Frame)

AEDASS-H-3014-E

---

● Long Rotating bobin flowmeter (230 mm) tube – calibrated with Luminous plate.
● Plenum type ether Vaporiser.
● Halothane Vaporizer Goldman Type.
● Non-return cum pressure relief valve.
● 50 mm dia Oxygen Gauge.
● Table top stainless steel.
● Top Tray for monitoring Instruments.
● Pin indexed Yokes for Oxygen.
● Pin Index Yokes for Nitrous-Oxide.
● Emergency Oxygen supply button.
● Outlet.
● Detachable capacious drawer.
● Maggill's circuit.
● Stainless/painted (Powder coated) frame.
● N₂O cut off system.
● Preset Regulators for O₂ and N₂O.
● Wheels with brake.


SAFETY FEATURES
» N₂O cut off in case Oxygen pressure fails below 10-15 Ponds.

Major Anesthesia Machine

AEDASS-H-3015

---

● Two gases Rotometr Oxygen and Nitrous Oxide with Hyposic-Guard Devices.
● Oxygen Flowmeter Range 100cc/min. to 10 ltrs./min. Nitrous Oxide Flowmeter range 200cc/min. to 12 ltrs/min.
● Standard Fresh Gas Outlet.
● Change over system open circuit to close circuit.
● Emergency Flush valve at front Panel connected to incoming O₂ supply.
● Goldman type Halothane Vaporizer.
● Parking space for two additional Vaporizers.
● Non-return cum pressure relief valve minimize risk of back flow of gasses.
● Blows off valve when pressure exceeds 200 cm of water column fitted.
● Provision to fit ventilator.
● Provision to fit carbon Dioxide Absorber.
● Extended platform at rear for two 'B' type cylinder.
● Table top made of Stainless Steel.
● Top Tray provided at eye level for keeping monitoring equipments.
● Maggill's or Bains circuit.
● One spacious Drawer on smooth runner.
● Four castor trolley with front two lockable wheels.
● Pin index yokes two for Oxygen and two for Nitrous Oxide.
● High-efficiency Regulators for reliability two each for O₂ and N₂O.


SAFETY FEATURES
» N₂O Automatic Cut Off in case failure of Oxygen Supply.
» Low pressure Oxygen addible Alarm.

Major Anesthesia Machine (Stainless Steel Square Frame)

AEDASS-H-3015-S

---

● Two gases Rotometr Oxygen and Nitrous Oxide with Hyposic-Guard Devices.
● Oxygen Flowmeter Range 100cc/min. to 10 ltrs./min. Nitrous Oxide Flowmeter range 200cc/min. to 12 ltrs/min.
● Standard Fresh Gas Outlet.
● Change over system open circuit to close circuit.
● Emergency Flush valve at front Panel connected to incoming O₂ supply.
● Goldman type Halothane Vaporizer.
● Parking space for two additional Vaporizers.
● Non-return cum pressure relief valve minimize risk of back flow of gasses.
● Blows off valve when pressure exceeds 200 cm of water column fitted.
● Provision to fit ventilator.
● Provision to fit carbon Dioxide Absorber.
● Extended platform at rear for two 'B' type cylinder.
● Table top made of Stainless Steel.
● Top Tray provided at eye level for keeping monitoring equipments.
● Maggill's or Bains circuit.
● One spacious Drawer on smooth runner.
● Four castor trolley with front two lockable wheels.
● Pin index yokes two for Oxygen and two for Nitrous Oxide.
● High-efficiency Regulators for reliability two each for O₂ and N₂O.


SAFETY FEATURES
» N₂O Automatic Cut Off in case failure of Oxygen Supply.
» Low pressure Oxygen addible Alarm.

Major Anesthesia Machine (Epoxy Coated Frame)

AEDASS-H-3015-P

---

● Two gases Rotometr Oxygen and Nitrous Oxide with Hyposic-Guard Devices.
● Oxygen Flowmeter Range 100cc/min. to 10 ltrs./min. Nitrous Oxide Flowmeter range 200cc/min. to 12 ltrs/min.
● Standard Fresh Gas Outlet.
● Change over system open circuit to close circuit.
● Emergency Flush valve at front Panel connected to incoming O₂ supply.
● Goldman type Halothane Vaporizer.
● Parking space for two additional Vaporizers.
● Non-return cum pressure relief valve minimize risk of back flow of gasses.
● Blows off valve when pressure exceeds 200 cm of water column fitted.
● Provision to fit ventilator.
● Provision to fit carbon Dioxide Absorber.
● Extended platform at rear for two 'B' type cylinder.
● Table top made of Stainless Steel.
● Top Tray provided at eye level for keeping monitoring equipments.
● Maggill's or Bains circuit.
● One spacious Drawer on smooth runner.
● Four castor trolley with front two lockable wheels.
● Pin index yokes two for Oxygen and two for Nitrous Oxide.
● High-efficiency Regulators for reliability two each for O₂ and N₂O.


SAFETY FEATURES
» N₂O Automatic Cut Off in case failure of Oxygen Supply.
» Low pressure Oxygen addible Alarm.

Major Anesthesia Machine (Stainless Steel Square Frame) Hypoxic Guard Device

AEDASS-H-3015-H

---

● Two gases Rotometr Oxygen and Nitrous Oxide with Hyposic-Guard Devices.
● Oxygen Flowmeter Range 100cc/min. to 10 ltrs./min. Nitrous Oxide Flowmeter range 200cc/min. to 12 ltrs/min.
● Standard Fresh Gas Outlet.
● Change over system open circuit to close circuit.
● Emergency Flush valve at front Panel connected to incoming O₂ supply.
● Goldman type Halothane Vaporizer.
● Parking space for two additional Vaporizers.
● Non-return cum pressure relief valve minimize risk of back flow of gasses.
● Blows off valve when pressure exceeds 200 cm of water column fitted.
● Provision to fit ventilator.
● Provision to fit carbon Dioxide Absorber.
● Extended platform at rear for two 'B' type cylinder.
● Table top made of Stainless Steel.
● Top Tray provided at eye level for keeping monitoring equipments.
● Maggill's or Bains circuit.
● One spacious Drawer on smooth runner.
● Four castor trolley with front two lockable wheels.
● Pin index yokes two for Oxygen and two for Nitrous Oxide.
● High-efficiency Regulators for reliability two each for O₂ and N₂O.


SAFETY FEATURES
» N₂O Automatic Cut Off in case failure of Oxygen Supply.
» Low pressure Oxygen addible Alarm.

Anesthesia Machine (Epoxy Coated Frame)

AEDASS-H-3020-E

---

● Long rotating bobbin flowmeter (230mm) tube calibrated.
● Oxygen flowmeter range 100cc/min to 8Ltrs./min Nitrous Oxide Flowmeter Range 200cc/min to 12Ltrs./min
● Plenum type ether vaporizer.
● Goldman type halothene vaporizer.
● Build-in-space for one more vaporizer.
● Non return cum pressure relief valve.
● Fresh gas outlet cum emergency Oxygen unit located at a convent position.
● Provision to fit Ventilator.
● Provision to fit Carbon Dioxide Absorber.
● Provision to accommodate two Nos. 10 Ltrs. Cylinders at the back side.
● Table top made of stainless steel.
● Top tray provided at eye level for keeping monitoring instrument.
● Maggill's or Bains Circuit.
● Fitted with two large diameter gauges each for Oxygen and Nitrous Oxide.
● One spacious Drawer on smooth runner.
● Pin Index Yokes two for Oxygen and two for Nitrous Oxide.
● Change over system for open and close circuit.
● Preset regulator's for O₂ and N₂O two each.
● Shelf for Ampule.


SAFETY FEATURES
» N₂O Automatic Cut Off in case failure of Oxygen Supply.
» Low pressure Oxygen addible mechanical Alarm.
» Hypoxicguard (Rotameter ensure protection against)
» Singular Flow of N₂O Until a minimum flow of 1.5 Ltr. Oxygen is released.

Anesthesia Machine (Stainless Steel Square Coated Frame)

AEDASS-H-3020-S

---

● Long rotating bobbin flowmeter (230mm) tube calibrated.
● Oxygen flowmeter range 100cc/min to 8Ltrs./min Nitrous Oxide Flowmeter Range 200cc/min to 12Ltrs./min
● Plenum type ether vaporizer.
● Goldman type halothene vaporizer.
● Build-in-space for one more vaporizer.
● Non return cum pressure relief valve.
● Fresh gas outlet cum emergency Oxygen unit located at a convent position.
● Provision to fit Ventilator.
● Provision to fit Carbon Dioxide Absorber.
● Provision to accommodate two Nos. 10 Ltrs. Cylinders at the back side.
● Table top made of stainless steel.
● Top tray provided at eye level for keeping monitoring instrument.
● Maggill's or Bains Circuit.
● Fitted with two large diameter gauges each for Oxygen and Nitrous Oxide.
● One spacious Drawer on smooth runner.
● Pin Index Yokes two for Oxygen and two for Nitrous Oxide.
● Change over system for open and close circuit.
● Preset regulator's for O₂ and N₂O two each.
● Shelf for Ampule.


SAFETY FEATURES
» N₂O Automatic Cut Off in case failure of Oxygen Supply.
» Low pressure Oxygen addible mechanical Alarm.
» Hypoxicguard (Rotameter ensure protection against)
» Singular Flow of N₂O Until a minimum flow of 1.5 Ltr. Oxygen is released.

Anesthesia Machine (Epoxy Coated Frame)

AEDASS-H-3028-E

---

● Two gases Rotameter Oxygen and Nitrous Oxide.
● Oxygen flowmeter Range 100cc/min. To 10 liters/min. Nitrous Oxide Flowmeter range 200cc/min. To 10 liters/min.
● Goldman Halothane Vaporizer.
● Built-in-Parking space for two additional vaporizer.
● Circle Absorber with transparent Canister.
● Non return cum pressure relief value to minimize risk of back flow of gases.
● Blows of value when pressure exceeds 200cm of water column fitted.
● Emergency push Button at front Panel connected to incoming O² supply. (Oxygen Push Button ensures free flow of Oxygen at 35-45 liters at 3.8 bar)
● Table Top made of stainless steel
● Top tray provided at eye level for keeping Monitoring Equipments
● Two self-sealing Quick Coupling Type Gas Outlets One each for O²N²O at the rear side for central pipe line connection
● Separate Oxygen flow meter for independent Oxygen supply
● Sline Stand Locate above right side of Trolley Provision to Fit Ventilator
● Extended platform at rear to accommodate Two 'B' Type Cylinders